How to Use Cutters When Laminating?

September 30, 2021
 
If you want to cut the material while laminating, but you don’t know how to use cutters or the cutter is not in the right position, what should you do? Don’t worry, I’ll tell you some tips for using cutters.
Manual Cold Press Roll Laminating Laminator Machine
The color of the picture is for reference only
1、cutting brace bar;2、cutter bar;3、longitudinal cutter(three as standard);
4、fine-tuning handle of cutter;5, up-down button of cutting brace bar
400
Lefu Laminating machine is equipped with three longitudinal cutters as standard, and multiple cutters can be installed, which need to be purchased separately. The longitudinal cutter adopts patented technology, and it slides freely on the special cutter bar. 
When the Lefu Laminating machine cutter is not in use, it must be stored in the protective cover and moved to the two sides of the machine.
Lefu Laminating machine Cutter use steps:
1.Wrap the picture onto the finished product bar.
2.Rotate the fine-tuning handle to make the cutter bar in the centered state.
3.Raise the cutting brace bar.
4.Move the cutter to the specified position and cut.
5.If there is a position deviation of the picture, do not move the cutter, just rotate the fine-tuning handle and manually track the picture position.
6.After laminating and cutting, drop the cutting brace bar.

TAG:  If you want to cut the material while laminating, but you don’t know how to use cutters or the cutter is not in the right position, what should you do? Don’t worry, I’ll tell you some tips for using cutters.